Datasheet 搜索 > 无焊端子 > C102 数据手册
图片仅供参考
C102 数据手册
型号系列: | C102 系列 |
分类: | 无焊端子 |
描述: | THOMAS & BETTS C10-250A 母型预绝缘无焊接线接头 |
文档: | C1022KJL 数据手册 (40 页) |
C102 无焊端子 数据手册
C102 数据手册 无焊端子
40 页
TE Connectivity(泰科)
C10 系列 10W,轴向Tyco C 系列价格实惠的电阻器能够在恶劣环境条件下通过相对较小尺寸消耗高功率 40°C 时的功率 | 10W ---|--- 电阻容差 | ±5% 温度系数 | ±90ppm/°C 工作温度 | \- 55 ° C → +200 ° C 极限元件电压 | 500V 主体长度 | 38.1 mm 主体直径 | 8.5 mm 引线长度 | 35 mm 引线直径 | 0.8 mm ### 搪瓷轴向和径向 - 2.5 至 50W小型大功率电阻器系列,适用于恶劣的环境。 它们的高稳定性和可靠性使其尤其适合于保护电路。电阻丝元件绕在高纯度的陶瓷基片上,并使用全焊接顶盖和引线的结构方式,提供相当大的强度和耐损坏性能。 搪瓷保护涂层对所有正常的印刷电路板清洁溶剂有抵抗作用。应用说明。 出端折弯点离壳体的距离不应小于 1.5mm。 建议最小弯曲半径为 1mm。 为了实现满载额定功耗,端接焊接后离主体不应少于 4mm。凉爽时,搪瓷具有极佳的绝缘电阻;但随着温度上升,电阻系数会下降。 因此,如果电阻器在最大温度或接近最大温度下工作时,它不能分类为绝缘电阻,且不应接触任何导电材料。
5 页
Ledil
LEDiL DOLLY Series LED LensesThe DOLLY series from LEDiL, are a family of round LED lenses with a diameter of 50 mm. These multi-lens arrays are designed for use with three LEDs. They have a clear lens and offer a spot or medium beam angle. DOLLY lenses direct the light from an LED light source through the lens to achieve the desired beam emission type with a uniform output. Made using an optical grade PMMA, the DOLLY lenses offer a high UV and temperature resistance. They fasten into place using positioning pins and glue. DOLLY lenses have been designed and optimised for use with a variety of LEDs. Due to the rapidly changing nature of LED products customers are strongly advised to consult the latest manufacturer data for compatible LEDs. ### 注The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED. ### LEDiL 多 LED 透镜
4 页
Thomas & Betts
THOMAS & BETTS C10-250F 快速断开端子, 母式快速断开, Sta-Kon 250系列, 0.25" x 0.032", 6.35mm x 0.81mm, 12 AWG, 10 AWG
器件 Datasheet 文档搜索
数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件