Datasheet 搜索 > 接口芯片 > FTDI Chip(飞特帝亚) > FT232BL-REEL Datasheet 文档
FT232BL-REEL 数据手册
暂未收录 FT232BL-REEL 的数据手册
如有需要,欢迎向管理员发送补充文档请求
FT232BL-REEL 数据手册 (34 页)
查看文档
或点击图片查看大图
FT232BL-REEL 技术参数、封装参数
类型 | 描述 |
---|---|
安装方式 | Surface Mount |
引脚数 | 32 Pin |
额定电流 | 25 A |
封装 | LQFP-32 |
供电电流 | 25 mA |
通道数 | 1 Channel |
针脚数 | 32 Position |
功耗 | 500 mW |
工作温度(Max) | 70 ℃ |
工作温度(Min) | 0 ℃ |
耗散功率(Max) | 500 mW |
电源电压 | 4.35V ~ 5.25V |
电源电压(Max) | 5.25 V |
电源电压(Min) | 3 V |
FT232BL-REEL 外形尺寸、物理参数、其它
类型 | 描述 |
---|---|
产品生命周期 | Active |
包装方式 | Tape & Reel (TR) |
长度 | 7 mm |
宽度 | 7 mm |
高度 | 1.4 mm |
工作温度 | 0℃ ~ 70℃ |
FT232BL-REEL 符合标准
FT232BL-REEL 海关信息
FT232BL-REEL 概述
FT232B - USB to Serial UART, FTDI Chip
●FTDI 芯片建议在新设计中使用 FT323R (RS 406-580)。
●FTDI Chip FT232B 是 USB 到串行 UART 接口,是将 USB 添加到老式设计中的理想解决方案。适用于最常见操作系统的免版税驱动程序可从 FTDI 网站获得。http://www.ftdichip.com
●\- TTL 数据速率 300 波特到 3 M 波特
●\- RS232 数据速率 300 波特到 3 M 波特
●\- RS422/RS485 数据速率 300 波特到 3 M 波特
●\- 384 字节接收缓冲器/128 字节传输缓冲器,实现高数据吞吐量
●\- 完全硬件辅助或 X-On/X-Off 信号交换
●\- 支持事件字符和换行条件
●\- RS485 具有自动传输缓冲器控制
●\- 紧凑型 32 引脚 (7 x 7 mm) LQFP 封装
●\- 集成 6 MHz - 48 Mhz 时钟倍增器
●\- 集成 3.3 V 稳压器 - 无需外接稳压器
●\- 4.4 V 至 5.25 V 单电源操作
●\- 符合 UHCI/OHCI 标准
更多
FT232BL-REEL 数据手册
FT232 数据手册
FTDI Chip(飞特帝亚)
FTDI FT232RL-REEL 接口桥接器, USB 到 UART, 1.8 V, 5.25 V, SSOP, 28 引脚, -40 °C
FTDI Chip(飞特帝亚)
FT232R - USB to Serial UART with Clock Generator, FTDI ChipThe FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic. The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.\- Single chip USB to asynchronous serial data transfer interface. \- Entire USB protocol handled on the chip. No USB-specific firmware programming required. \- Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration. \- Fully integrated USB termination resistors. \- Fully integrated clock generation with no external crystal required plus optional clock output \- Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels. \- 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput ### 串行输入/输出外设
FTDI Chip(飞特帝亚)
FTDI FT232HL-REEL 接口桥接器, USB 至 UART, FIFO, 2.97 V, 3.63 V, LQFP, 48 引脚, -40 °C
FTDI Chip(飞特帝亚)
FT232R - USB to Serial UART with Clock Generator, FTDI Chip The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic. The FT232R is available in compact 28-pin SSOP (RS 406-580 - Single chip USB to asynchronous serial data
FTDI Chip(飞特帝亚)
FT232B - USB to Serial UART, FTDI Chip FTDI Chip recommends using the FT323R (RS 406-580 - TTL data rate 300 Baud to 3 MBaud \- RS232 data rate 300 Baud to 3 MBaud \- RS422/RS485 data rate 300 Baud to 3 MBaud \- 384 Byte Receive buffer/128 Byte Transmit buffer for high data throughput \- Full hardware assisted or X-On/X-Off handshaking \- Support for event characters and line break condition \- Auto transmit buffer control for RS485 \- Compact 32-pin (7 x 7 mm) LQFP package \- Integrated 6 MHz - 48 MHz clock multiplier \- Integrated 3.3 V regulator - no external regulator required \- 4.4 V to 5.25 V single supply operation \- UHCI/OHCI compliant 串行输入/输出外设
FTDI Chip(飞特帝亚)
FTDI FT232HQ-REEL 接口桥接器, USB 至 UART, FIFO, 2.97 V, 3.63 V, QFN, 48 引脚, -40 °C
FTDI Chip(飞特帝亚)
FTDI Chip(飞特帝亚)
器件 Datasheet 文档搜索
示例: STM32F103
数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件