类型 | 描述 |
---|
安装方式 | Surface Mount |
引脚数 | 28 Pin |
电源电压 | 1.80V (min) |
封装 | SSOP-28 |
供电电流 | 15 mA |
功耗 | 500 mW |
数据速率 | 3.00 Mbps |
带宽 | 48.0 MHz |
工作温度(Max) | 85 ℃ |
工作温度(Min) | -40 ℃ |
耗散功率(Max) | 500 mW |
类型 | 描述 |
---|
产品生命周期 | Active |
包装方式 | Tape & Reel (TR) |
长度 | 10.2 mm |
宽度 | 5.3 mm |
高度 | 1.75 mm |
工作温度 | -40℃ ~ 85℃ |
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
●FTDI 芯片 FT232R 是 USB 到串行 UART 接口,带可选时钟发生器输出。还提供异步和同步位冲接口模式。与 EEPROM 时钟电路和 USB 电阻器一起,有效成为适合某些应用的3 合 1芯片。内部生成的时钟(6 MHz、12 MHz、24 Mhz 和 48 MHz)可用于驱动微控制器或外部逻辑。
●在制造期间将独特的编号 (FTDI 芯片 ID) 刻录到设备中并可通过 USB 读取,从而形成安全保护器的基础。它然后可用于保护客户应用软件,避免遭到复制。适用于最常见操作系统的免版税驱动程序可从 FTDI 网站获得。http://www.ftdichip.com
●FT232R 采用紧凑型 28 引脚 SSOP (RS 406-580) 和 32 引脚 QFN (RS 730-0168) 封装。
●\- 单芯片 USB 至异步串行数据传输接口。
●\- 整个 USB 协议在芯片上处理无需特定于 USB 的固件编程。
●\- 完全集成的 1024 位 EEPROM 存储设备描述符和 CBUS 输入/输出配置。
●\- 完全集成的 USB 端接电阻器。
●\- 完全集成的时钟发生,无需外部晶体,带可选时钟输出
●\- TTL 级别数据传输率从 300 波特至 3 M 波特(RS422、RS485 和 RS232)。
●\- 128 B 接收缓冲器和 256 B 传输缓冲器,利用缓冲器平滑技术实现高数据吞吐量
FTDI Chip(飞特帝亚)
47 页 / 0.79 MByte
FTDI Chip(飞特帝亚)
43 页 / 0.73 MByte
FTDI Chip(飞特帝亚)
FTDI FT232RL-REEL 接口桥接器, USB 到 UART, 1.8 V, 5.25 V, SSOP, 28 引脚, -40 °C
FTDI Chip(飞特帝亚)
FT232R - USB to Serial UART with Clock Generator, FTDI ChipThe FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic. The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.\- Single chip USB to asynchronous serial data transfer interface. \- Entire USB protocol handled on the chip. No USB-specific firmware programming required. \- Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration. \- Fully integrated USB termination resistors. \- Fully integrated clock generation with no external crystal required plus optional clock output \- Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels. \- 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput ### 串行输入/输出外设
FTDI Chip(飞特帝亚)
FTDI FT232HL-REEL 接口桥接器, USB 至 UART, FIFO, 2.97 V, 3.63 V, LQFP, 48 引脚, -40 °C
FTDI Chip(飞特帝亚)
FT232R - USB to Serial UART with Clock Generator, FTDI Chip The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic. The FT232R is available in compact 28-pin SSOP (RS 406-580 - Single chip USB to asynchronous serial data
FTDI Chip(飞特帝亚)
FT232B - USB to Serial UART, FTDI Chip FTDI Chip recommends using the FT323R (RS 406-580 - TTL data rate 300 Baud to 3 MBaud \- RS232 data rate 300 Baud to 3 MBaud \- RS422/RS485 data rate 300 Baud to 3 MBaud \- 384 Byte Receive buffer/128 Byte Transmit buffer for high data throughput \- Full hardware assisted or X-On/X-Off handshaking \- Support for event characters and line break condition \- Auto transmit buffer control for RS485 \- Compact 32-pin (7 x 7 mm) LQFP package \- Integrated 6 MHz - 48 MHz clock multiplier \- Integrated 3.3 V regulator - no external regulator required \- 4.4 V to 5.25 V single supply operation \- UHCI/OHCI compliant 串行输入/输出外设
FTDI Chip(飞特帝亚)
USB 全速 转 串行 UART IC - LQFP-32
FTDI Chip(飞特帝亚)
FTDI FT232RQ 接口桥接器, USB 到 UART, 1.8 V, 5.25 V, QFN, 32 引脚, -40 °C
FTDI Chip(飞特帝亚)
FTDI FT232HQ-REEL 接口桥接器, USB 至 UART, FIFO, 2.97 V, 3.63 V, QFN, 48 引脚, -40 °C
器件 Datasheet 文档搜索
数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件