RM35BA10 数据手册 - Schneider Electric（施耐德）

RM35 JA 系列电流控制继电器多功能电流控制继电器监测交流和直流电流。 自动识别交流或直流电流。 测量范围为 2 mA → 15 V， 在过电流和低电流之间选择，测量真实有效值 可选存储功能。 ### 认可UL, CSA, GL, C-Tick, GOST### 标准NF EN 60255-6 和 IEC 60255-6### Schneider Electric 电压、电流、相位和电动机保护

RM35 JA Series Current Control RelayMultifunction current control relays monitor both AC and DC currents. Automatic alternating or direct current recognition. Measurement ranges from 2 mA → 15 V, Selection between overcurrent and undercurrent, measurement as true effective value, Selectable memory function. ### 认可UL, CSA, GL, C-Tick, GOST### 标准NF EN 60255-6 and IEC 60255-6### Schneider Electric 电压、电流、相位和电动机保护

Level control relays RM35 L The level control relays RM35 LM33MW and RM35 LV14MW control one or two levels, filling or draining function: RM35 LM33MW: control by resistive level sensor. RM35 LV14MW: control by “On/Off” sensor. Fitted with a clear hinged front flap to prevent any accidental alteration of settings. LED display of output status. Fitting on DIN Rail. 认可 UL, CSA, GL, C-Tick, GOST 标准 NF EN 60255-6 and IEC 60255-6 导电料面探针控制器继电器 液位继电器用于监测导电液体的液位，且提供向上/向下、最小、最大和灌注/排空变型。 液位继电器可直接安装且使用安全。 **Application Examples Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the: Monitoring and control of liquid levels Protection of pumps against dry running Ability to detect liquid leaks in a system Control of media mixing ratios Control of liquid levels

RM35 S speed control relayUsed to control conveyor belt, packaging and handling systems in the event of underspeed or overspeed. Operates with different types of sensor, 3-wire proximity sensor, NPN or PNP, Namur type sensor; Input voltage 0 → 30 V, or dry contact input. Adjustable pulse and inhibition time Fitted with a clear hinged front cover to prevent any accidental alteration of settings. LED display of output status. For mounting on DIN rail. Measurement range: | 0.05 → 0.5 s ---|---   | 0.1 → 1 s   | 0.5 → 5 s   | 1 → 10 s   | 0.1 → 1 min   | 0.5 → 5 min   | 1 → 10 min 3-wire sensor (E1): | PNP or NPN, 12 V, 50 mA max. NAMUR sensor (E2): | 12 V, 1.5 kΩ Dry contact inputs (E1): | 12 V, 9.5 kΩ Input voltage (E1) : | Voltage range: 0 V min., 30 V max.   | Input resistance: 9.5 kΩ   | Top status: 4.5 V min.   | Bottom status: 1 V max. Threshold setting: | 10 → 100% of the range Operating temperature: | -20 °C → +50 °C ### 认可UL, CSA, GL, C-Tick, GOST### 标准NF EN 60255-6 and IEC 60255-6### Schneider Electric 电压、电流、相位和电动机保护

RM17 UB3 和 RM35 UB3 三相电压控制继电器电压测量和控制继电器监控三相网络上的以下内容： 一个或多个相位的总损耗，中性、过压和欠压的损耗。 该继电器监控自己的电源电压，以真有效值测量。 配有一个透明铰接前盖，可防止任何意外设置更改。 在发生电压故障时，继电器会在用户设置的延时结束时变为开路。 如果设备打开时发生测量故障，继电器会保持开路状态。 在发生中性或相序损耗时，继电器会立即变为开路。 LED 输出状态显示。 用于安装在 DIN 导轨上。 ### 过压 / 欠压控制器：RM35 UB330继电器监测自己的 Un 电源电压： 继电器控制三个相位中至少一个的损耗（测量 U 每个阈值都有自己的时间延时，可独立调整，0.3 → 30 秒。 继电器监测自己的 Un 电源电压： 继电器控制中性存在、欠压漂移和相位损耗。 每个阈值都有自己的时间延时，可独立调整，0.3 → 30 秒。 ### 过压 / 欠压和中性损耗控制器：RM35 UB3N30继电器监测自己的 Un 电源电压： 继电器控制欠压漂移、过压漂移和相位损耗。 可调延时，0.3 → 30 秒，用于在发生瞬时故障期间抑制继电器输出。 ### 过压 / 欠压控制器：RM17 UB310### 认可UL, CSA, GL, C-Tick, GOST### 标准NF EN 60255-6 和 IEC 60255-6### Schneider Electric 电压、电流、相位和电动机保护

RM35 UA Series Multifunction Voltage Control RelayMultifunction current control relays monitor both AC and DC currents. Automatic alternating or direct current recognition. Measurement ranges from 0.05 V → 600 V. Selection between overcurrent and undercurrent, with selectable memory function Fitted with a clear hinged front cover to prevent any accidental alteration of settings. LED display of output status. For mounting on DIN rail. ### 认可UL, CSA, GL, C-Tick, GOST ### 标准NF EN 60255-6 and IEC 60255-6 ### Schneider Electric 电压、电流、相位和电动机保护

RM35 UA Series Multifunction Voltage Control RelayMultifunction current control relays monitor both AC and DC currents. Automatic alternating or direct current recognition. Measurement ranges from 0.05 V → 600 V. Selection between overcurrent and undercurrent, with selectable memory function Fitted with a clear hinged front cover to prevent any accidental alteration of settings. LED display of output status. For mounting on DIN rail. ### 认可UL, CSA, GL, C-Tick, GOST ### 标准NF EN 60255-6 and IEC 60255-6 ### Schneider Electric 电压、电流、相位和电动机保护

RM35 JA 系列电流控制继电器多功能电流控制继电器监测交流和直流电流。 自动识别交流或直流电流。 测量范围为 2 mA → 15 V， 在过电流和低电流之间选择，测量真实有效值 可选存储功能。 ### 认可UL, CSA, GL, C-Tick, GOST### 标准NF EN 60255-6 和 IEC 60255-6### Schneider Electric 电压、电流、相位和电动机保护